GCC Printers Elite XL User Manual download pdf (Page 180)

Upgrading the printer’s memory C-7

still not displayed correctly, contact GCC Technical Support at (617) 276-8620.

Updating LaserWriter 8 printer driver

After the SIMM(s) are installed, the Macintosh printing software needs to be

updated, by updating the LaserWriter 8 driver configuration, so that the

additional memory is recognized by the printer driver.

To update the driver configuration:

1. Switch on the Elite XL.

2. Choose the Chooser from the Apple ( ) menu.

3. Click the LaserWriter 8 icon in the upper-left area of the Chooser.

The name Elite XL appears in the upper-right area of the Chooser below

“Select a PostScript Printer.” The name should appear highlighted; click

the printer’s name if it is not highlighted.

4. Click Setup….

The Setup dialog box appears.

5. Click Auto Setup.

A message box appears, informing you that the Macintosh is communicat-

ing with the Elite XL.

The LaserWriter 8 driver is automatically configured to use the newly

installed memory.

Note: If you have set the Paper Sizes menu in the Configure dialog box to either U.S.

Only or International Only, you will need to reselect the option because the Auto

Setup function resets this menu to the default – U.S. and International. See page 3-7

for information about the Paper Sizes configuration option.

Updating the LaserWriter 8 printer driver

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 198 199

No comments

GCC Printers Elite XL User Manual Page 180