GCC Printers Elite XL User Manual download pdf (Page 147)

Fonts 6-13

If you are attching more than one hard disk to the printer, we recommend that

you always use the “Initialize some disks” option, and that you initialize each

hard disk separately before chaining them together.

4. Click the button labeled Initialize some disks.

5. Click the box next to the SCSI ID of the first hard disk to be initial-

ized.

An X appears in the box and the Initialize button becomes active.

6. Click Initialize.

A dialog appears asking if you really want to initialize this hard disk. Click

OK to proceed, or click Cancel. A progress status box appears.

7. Click OK.

If the initialization fails, repeat the initialization steps. If the initialization

was successful, repeat the steps for each additional hard disk.

8. Use the LaserWriter Utility to download fonts to the hard disk(s). See

“Downloading fonts from the Macintosh” on page 5-6 for more informa-

tion.

Initializing hard disks from an IBM PC or compatible

To initialize an external hard disk connected to the Elite XL using an IBM PC

or compatible, use the INITDISK.PS file provided on the Elite XL Software and

Documentation CD-ROM. When sent to the printer, this file will initialize any

uninitialized hard disks connected to the printer.

For example, if the printer is connected to the first parallel port,

Type: copy /b d:\initdisk.ps lpt1:

If the printer is connected to the first serial port,

Type: copy /b d:\initdisk.ps com1:

Initializing an external hard disk

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 198 199

No comments

GCC Printers Elite XL User Manual Page 147