GCC Printers Elite 12ppm User Manual download pdf (Page 150)

D-3

8. Replace the 500-sheet and the 250-sheet paper trays.

9. If necessary, move the printer to the location where it will be kept. There are

two finger grips, one on either side of the sheet feeder.

10. Reconnect the power and interface cables.

11. Configure the software on each computer that will use the printer.

Using the 500-sheet paper tray and the envelope paper tray

The sheet feeder can hold either the 500-sheet paper tray or the envelope tray. These slide

into the sheet feeder in the same way as the 250-sheet paper tray slides into the printer.

Loading the 500-sheet paper tray

Loading the 500-sheet paper tray is similar to loading the 250-sheet paper tray, but you

adjust for different paper sizes in a different way.

1. Remove the paper tray from the feeder.

2. If you need to adjust the paper size guides, follow the next four steps. If not, go

to step 6.

3. Turn the paper tray so that the front is away from you. The length guide has

two indentations at left and right. Put your thumb in one and push up gently.

When this releases that side, push up the other side.

4. Slide the guide forward or backward so that the colored tabs on the base of the

paper tray align with the position for the paper size you’ll be using.

5. Press down on the guide to lock it into place. Turn the paper tray around so

that the front is toward you.

6. Squeeze the width guide lever toward its brace, and then pull the guide lever

to the right.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 192 193

No comments

GCC Printers Elite 12ppm User Manual Page 150