GCC Printers Elite XL User Manual

iGCCTECHNOLOGIESUser’s ManualGCCTECHNOLOGIESElite XL808Elite XL

x Chooser problems ...7-3LocalTalk problems ...

Using the Elite XL with Windows and DOS 4-2117. Click Finish.The software installation will now commence. At one point, you will beasked to insert

Chapter 4Using the Elite XL with Windows and DOS4-22 Chapter 4If you selected a network printer in steps 4 and 5, a Capture Settings tabwill be v

Using the Elite XL with Windows and DOS 4-23If you did not select a parallel port (LPT1, LPT2, or LPT3), proceed tostep25.23. Click Spool Settings

Chapter 4Using the Elite XL with Windows and DOS4-24 Chapter 4Click the Disable bi-directional support for this printer radiobutton.We recommend

Using the Elite XL with Windows and DOS 4-25To access the Properties dialog box for your GCC printer:1. In the Printers folder, click on the print

Chapter 4Using the Elite XL with Windows and DOS4-26 Chapter 4The Properties dialog box is a standard feature of Windows 95. The dialog boxis com

Using the Elite XL with Windows and DOS 4-27The Device Options panelThe Device Options panel contains settings specific to your GCC printermodel.P

Chapter 4Using the Elite XL with Windows and DOS4-28 Chapter 4Updating the printer driverAfter installing additional memory in your printer, it i

Using the Elite XL with Windows and DOS 4-29The Details panelThe Details panel enables you to change the printer driver and port settings.Refer to

Chapter 4Using the Elite XL with Windows and DOS4-30 Chapter 4The Paper panelThe Paper panel enables you to select paper sizes, layout, orientati

xiCongratulations on your purchase of a GCC Technologies® Elite™ XL laser printer. The EliteXL family of printers consists of 8 and 16 page-per-m

Using the Elite XL with Windows and DOS 4-31The Graphics panelThe Graphics panel enables you to adjust settings that control the look of yourdocum

Chapter 4Using the Elite XL with Windows and DOS4-32 Chapter 4The Fonts panelThe Fonts panel enables you to specify how fonts are sent to the pri

Using the Elite XL with Windows and DOS 4-33Printing from Windows 95 applicationsGCC printers are designed to work with all Windows 95 compatiblea

Chapter 4Using the Elite XL with Windows and DOS4-34 Chapter 4The Print Properties dialog boxThe Properties dialog box available from the Print d

Using the Elite XL with Windows and DOS 4-35Using a GCC Printer with DOSPrinting in the DOS environment takes place from either the DOS commandlin

Chapter 4Using the Elite XL with Windows and DOS4-36 Chapter 4Port configuration – DOSIn order for successful printing to take place, DOS, your D

Using the Elite XL with Windows and DOS 4-37Redirecting DOS to a serial portDOS and some DOS applications only print through a parallel port. If y

Chapter 4Using the Elite XL with Windows and DOS4-38 Chapter 4The PCL 5 printer language was developed by Hewlett-Packard. For moreinformation ab

Using the Elite XL with Windows and DOS 4-39Installing the printer description filesPrinter description files (file names with the following exten

QuickDraw GX 5-1IntroductionQuickDraw GX is Apple Computer’s new printing and typographic systemsoftware. This guide is a brief introduction to th

xii IntroductionMultiple network solutionsIn addition to Elite XL’s built-in AppleTalk software and interface, all Elite XL printers are shippedstand

Chapter 5QuickDraw GX5-2 Chapter 5Installing GCC QuickDraw GX PostScript printer driversGCC QuickDraw GX PostScript printer drivers are shipped a

QuickDraw GX 5-3Choosing a GX printer driver (creating a desktop printer icon)With QuickDraw GX you no longer use the Chooser to select a printer.

Chapter 5QuickDraw GX5-4 Chapter 5Configuring a desktop printerAfter you have created a desktop printer you need to configure it. Adesktop printe

QuickDraw GX 5-5Configuring a desktop printerDetermining input tray paper size(s)The Input Trays… selection enables you to “tell” the printer driv

Chapter 5QuickDraw GX5-6 Chapter 54. Click Print.In a few moments a page will print.5. Choose Input Tray… from the Printing menu again.A new di

QuickDraw GX 5-7QuickDraw GX Page Setup dialog boxQuickDraw GX Page Setup dialog box (GX aware applications)The QuickDraw GX Page Setup dialog box

Chapter 5QuickDraw GX5-8 Chapter 5If you click More Choices, the second-level of the Page Setup dialog boxappears displaying additional page setu

QuickDraw GX 5-9QuickDraw GX Page Setup dialog boxThe Options panelWhen Options (preceded by the name of your GCC printer) is highlighted inthe sc

Chapter 5QuickDraw GX5-10 Chapter 5QuickDraw GX Print dialog box (GX aware applications)The QuickDraw GX print dialog box displayed by GX aware a

QuickDraw GX 5-11QuickDraw GX Print dialog boxIf you click More Choices, the second-level of the Print dialog box appearsdisplaying additional Pri

xiiiThe following Quick Start procedures are intended for users who are experienced in thesetup and configuration of network laser printers in th

Chapter 5QuickDraw GX5-12 Chapter 5Destination enables you to send your document to the selected desktopprinter, or to save it to a PostScript fi

QuickDraw GX 5-13Page Setup and Print dialog boxesPage Setup and Print dialog boxes (unadopted applications)If QuickDraw GX is enabled and you are

Chapter 5QuickDraw GX5-14 Chapter 5Print dialog boxThe Print dialog box pictured below appears in applications that have notadopted QuickDraw GX.

QuickDraw GX 5-15Substituting LaserWriter 7.1.2 or LaserWriter 8 for LaserWriter 7.2The LaserWriter 7.2 printer driver provides paper sources and

Chapter 5QuickDraw GX5-16 Chapter 5To use LaserWriter 8:1. Remove any versions of LaserWriter 7.x.x from the Extensions folder.If you are not sur

Fonts 6-1IntroductionThe Elite XL supports a wide range of font types and formats for both thePostScript and PCL environment.For PostScript users,

Chapter 6Fonts6-2 Chapter 6For more information on the structure of the PostScript language, Adobe offersthree books, published by Addison-Wesley

Fonts 6-3Palatino Bitstream Zapf Calligraphic™A B C D E F G H I J K L M N O P Q R S T U V W X Y Za b c d e f g h i j k l m n o p q r s t u v w x y

Chapter 6Fonts6-4 Chapter 6PCL resident font catalogThe Elite XL includes 2 PCL outline font families (Times and Univers)and 2 bitmap fonts (Cour

Fonts 6-5In addition to the symbol sets listed, the Elite XL supports the followingsymbol sets for resident scalable fonts:Ventura Math Ventura In

xiv Quick StartQuick Start IBM PC and compatible software configuration1. Install the GCC Elite XL Windows driver for your Elite XL model,from the El

Chapter 6Fonts6-6 Chapter 6Downloading fonts from a MacintoshIn addition to the fonts that come with the Elite XL, you can purchase morefonts (bo

Fonts 6-73. Choose Download Fonts… from the File menu.The font downloading dialog box appears. The top section indicates thelocation to which the

Chapter 6Fonts6-8 Chapter 67. Click Download.Note: If you are using a downloaded font, install the corresponding screen font onthe Macintosh.Addi

Fonts 6-9Utilities menu functionsChoose:Name Printer… to rename your printer. See “Naming the Elite XL” on page3-20.Set Startup Page… to turn the

Chapter 6Fonts6-10 Chapter 6Using an external hard disk with the Elite XLThe Elite XL provides a SCSI port for connecting up to seven external ha

Fonts 6-114. Connect the 50-pin end of the SCSI cable to one of the SCSI ports onthe back of the hard disk and fasten the clips. The SCSI cable ca

Chapter 6Fonts6-12 Chapter 6Initializing an external hard diskEach hard disk connected to the printer must be specifically initialized forstoring

Fonts 6-13AB If you are attching more than one hard disk to the printer, we recommend thatyou always use the “Initialize some disks” option, a

Maintenance and troubleshooting 7-1Routine maintenanceThe Elite XL is exceptionally easy to maintain. Besides periodic replacementof the toner car

Chapter 7Maintenance and troubleshooting7-2 Chapter 7Cleaning the printerToner spillage inside the printer and soiling on the external surfaces o

Setting up the Elite XL 1-1Unpacking the printerIn addition to the printer, the Elite XL box contains the following items:IMPORTANT: Save all pack

Maintenance and troubleshooting 7-3TroubleshootingYour Elite XL is designed to perform smoothly and reliably. It passed rigorousquality standards

Chapter 7Maintenance and troubleshooting7-4 Chapter 7If the name of your Elite XL does not appear in the “Select aLaserWriter” scroll box after s

Maintenance and troubleshooting 7-5Serial and parallel communication problemsIf the Elite XL does not print, there may be a problem with the setup

Chapter 7Maintenance and troubleshooting7-6 Chapter 7If the appropriate network LED is on and the printer will not print:• Switch off the printer

Maintenance and troubleshooting 7-7Macintosh font problemsIf the fonts printed on the Elite XL appear to be low-quality screen fontsrather than hi

Chapter 7Maintenance and troubleshooting7-8 Chapter 7PCL problemsIf your PCL print jobs print incorrectly check the following:• Be sure the PS/PC

Maintenance and troubleshooting 7-9ReadyThe printer is on line and ready to accept a job.Off lineThe printer is off line.Insert Tray 1There is no

Chapter 7Maintenance and troubleshooting7-10 Chapter 7Paper handling messages:Tray 1 emptyThe tray inserted into the printer’s standard paper tra

Maintenance and troubleshooting 7-11TroubleshootingClearing paper jamsFrom time to time paper may jam inside the printer during printing. When apa

Chapter 7Maintenance and troubleshooting7-12 Chapter 72. Remove the jammed paper.The jammed paper should be visible; jams can occur in a number

Setting up the Elite XLChapter 11-2 Chapter 1Printer InformationConfiguration PageGCCTECHNOLOGIESFor more information or the dealer nearest you, c

Maintenance and troubleshooting 7-13Troubleshooting3. Remove the paper tray and remove any partially fed paper.GCCTECHNOLOGIESElite XL6084. Reinst

Chapter 7Maintenance and troubleshooting7-14 Chapter 7Poor quality outputMost poor output problems are simple to diagnose and solve. The followin

Maintenance and troubleshooting 7-15TroubleshootingSymptom: Light or faded area(s) within the print.Data sent to printerPress the ON-LINE button t

Chapter 7Maintenance and troubleshooting7-16 Chapter 7Symptom: Print rubs off or smears.Data sent to printerPress the ON-LINE button totake the d

Printer specifications A-1Print Engine:8ppm Fuji Xerox Ninja A316ppm Fuji Xerox HarunaPrint Method:Dry type laser printingController:Languages: Po

A-2 Appendix AAppendix APrinter specificationsNoise level:8ppm printers 16ppm printersLess than 48.5 db during operation 53 db during operationLe

Printer specifications A-3Elite XL optional paper sources:Letter tray/250 sheet capacity:Letter (SEF) (LEF) Statement (LEF) Executive (LEF)A4 (SEF

A-4 Appendix AAppendix APrinter specificationsPrint tolerance specificationsDirection of Paper FeedWHorizontal accuracy( - 2.0 mm) ≤ T ≤ ( + 2.0

Printer specifications A-5Print tolerance specificationsLead edge registration(4.0 - 2.0 mm) ≤ A ≤ (4.0 + 2.0 mm)B = BADirection of Paper FeedBB

A-6 Appendix AAppendix APrinter specificationsDirection of Paper FeedSide edge registration(4.0 - 2.5 mm) ≤ C ≤ (4.0 + 2.5 mm)D = DDDC

Setting up the Elite XL 1-3Choosing a location for the printerPlace the Elite XL on a flat, level surface in a well-ventilated area away fromdirec

Printer specifications A-7Skew( - 2.0 mm) ≤ E ≤ ( + 2.0 mm)E = F - GH = 245 mmDirection of Paper FeedH GFPrint tolerance specifications

A-8 Appendix AAppendix APrinter specificationsDirection of Paper FeedVertical accuracy ( - 1.3 mm) ≤ J ≤ ( + 1.3 mm)K = LM = 210 mmJMKL90°

Paper specifications and recommendations B-1GCC Technologies recommends the following materials for use with the EliteXL. GCC does not assume liab

B-2 Appendix BAppendix B Paper specifications and recommendationsEnvelopes should be fed from the multipurpose feeder. There is also anenvelope tr

Upgrading the printer’s memory C-1Installing SIMMs into the Elite XLAll Elite XL models come with a certain amount of standard RAM. The RAMis in t

Appendix CUpgrading the printer’s memoryC-2 Appendix CTo install SIMMs:1. Switch off the printer, unplug the AC power cord from the wall socket.2

Upgrading the printer’s memory C-3Installing SIMMs into the Elite XL5. Remove the controller board access panel.8ppm printers –a. Hold the paper o

Appendix CUpgrading the printer’s memoryC-4 Appendix C6. Remove the metal shield plate.Using the Phillips screwdriver, loosen the single shield s

Upgrading the printer’s memory C-59. Remove SIMMs (if applicable).If your printer has SIMMS in both connectors, and you are only replacing oneof t

Appendix CUpgrading the printer’s memoryC-6 Appendix C11. Replace the metal shield plate.Reposition the metal shield plate then, using the Philli

Setting up the Elite XLChapter 11-4 Chapter 1Installing or replacing a toner cartridgeThe toner cartridge contains powdered ink, called toner, tha

Upgrading the printer’s memory C-7still not displayed correctly, contact GCC Technical Support at (617) 276-8620.Updating LaserWriter 8 printer dr

Appendix CUpgrading the printer’s memoryC-8 Appendix CUpdating the Windows driverAfter installing the additional memory, it is a good idea to upd

Configuring optional sheet feeders D-1Selecting an optional sheet feeder/tray (Macintosh/LaserWriter 8)After an additional sheet feeder is attache

PCL: additional information E-1Note: Because theletter “l” is oftenconfused with thenumeral “1”, we usethe character “l” inthe escape se-quences,

Appendix EPCL: additional informationE-2 Appendix E123456789The PCL font list page, which can be printed via the Elite XL front panel InfoPages m

PCL: additional information E-31. Font Number: The number you would use to select a font as the defaultfont in the PCL Font Number submenu.2. Font

Interface connections and pinouts F-110BASE-210BASETEthernetCentronics(parallel)LocalTalkRS-422(serial)SCSI8-pinMini-Din50 pin36-pinCHAMP®8-pin RJ

F-2 Appendix FAppendix F Interface connections and pinoutsInterface connector pinoutsUse the following pinouts and descriptions of the various El

Interface connections and pinouts F-3Interface connections and pinoutsEthernet (UTP):PIN SIGNAL DESCRIPTION DIRECTION1 TX+ Transmit+ Out >2 TX-

Radio and television interference G-1The Elite XL generates radio frequency energy and, if not installed and used inaccordance with GCC Technologi

Setting up the Elite XL 1-53. If you are replacing a cartridge, remove the empty cartridge anddiscard it.Grasp the yellow handle on each end of th

Service and support H-1AppendixHService and supportGCC Technologies is committed to servicing and supporting the products it sells.The documentati

Optional accessories I-1The following optional accessories are available for the Elite XL. See Appen-dix J for ordering information or contact GCC

Ordering information J-1For information on ordering consumable items and accessories for the EliteXL, please call Customer Service at (800) 422-77

Glossary K-1AppleTalk: A network communication protocol for connecting computers andother devices to share information.AccuGray: A GCC software te

K-2 Appendix KGlossarydot gain: An unavoidable increase in the size of halftone dots due to the interac-tion of toner, paper, heat, and pressure d

Glossary K-3GlossaryLocalTalk cable system: Apple’s network cable system used to support anAppleTalk network system.megabyte: A unit of measuremen

K-4 Appendix KGlossaryscreen fonts: Fonts displayed on the Macintosh screen that are stored in theSystem file.screen frequency: The number of line

L-1 License and warrantiesOPENING THE BAG CONTAINING THE SOFTWARE (the “Software”) WHICH ACCOMPANIES THIS MANUAL INDICATES YOURACCEPTANCE OF THE T

L-2 License and warrantiesLimited Software WarrantyWARRANTYIf you discover physical defects in the medium on which the Software or the Documentati

L-3 License and warrantiesLimited Hardware WarrantyWARRANTYGCC Technologies, Inc. (“GCC”) warrants, for the limited period of one year from the da

ii EPA POLLUTION PREVENTER030.15218 Rev. B 7/95FEDERAL COMMUNICATIONS COMMISSIONWARNING: This equipment was tested and found to comply with the

Setting up the Elite XLChapter 11-6 Chapter 15. Distribute the toner.Unpack the new toner cartridge and gently shake it back and fortha few times,

Setting up the Elite XL 1-77. Insert the toner cartridge into the printer.Hold the cartridge by the yellow handles. Slowly lower the cartridgeinto

Setting up the Elite XLChapter 11-8 Chapter 1To use the cleaning paper:1. Switch on the printer.2. Open the multipurpose feeder.The multipurpose f

Setting up the Elite XL 1-94. Press the On Line key.The On Line key is on the printer’s front panel. After you press thekey, the display window sh

Setting up the Elite XLChapter 11-10 Chapter 1Using the Tabloid/A3 Universal paper trayAll models of the Elite XL come standard with a Tabloid/A3

Setting up the Elite XL 1-11Using the Tabloid/A3 Universal paper trayThe Universal paper tray can handle the following paper sizes and orientation

Setting up the Elite XLChapter 11-12 Chapter 1Using the multipurpose feederThe multipurpose feeder holds up to 50 sheets of 20 lb. copier-type pap

Setting up the Elite XL 1-13Using the multipurpose feeder2. Pull out the feeder tray extension.GCCTECHNOLOGIESElite XL6083. Adjust the paper guide

Setting up the Elite XLChapter 11-14 Chapter 1Insert letterhead face down with the top edge entering the printer first,for short edge feed; for lo

Setting up the Elite XL 1-154. Attach the extension plate.Grasp the extension plate at the back and slide it onto the multipurposefeeder tray exte

iiiContentsIntroductionQuick StartQuick Start Elite XL printer setup...xiiiQuick Start Macintosh softwar

Setting up the Elite XLChapter 11-16 Chapter 1Opening the paper output trayAfter pages are printed, they are deposited into the output tray on top

Setting up the Elite XL 1-172. Open the second output tray extension. Tray full sensorElite XL 16ppm printers include a “tray full” sensor that ha

Setting up the Elite XLChapter 11-18 Chapter 1Connecting power to the Elite XLThe printer must be plugged into a grounded AC outlet (15 Amp) using

Setting up the Elite XL 1-19Elite XL interface connectionsAll Elite XL models include LocalTalk, RS-422 serial, and Centronicsparallel interfaces;

Setting up the Elite XLChapter 11-20 Chapter 1LocalTalk connectionThe Elite XL works with all AppleTalk-compatible networks. It connectsto an Appl

Setting up the Elite XL 1-21Plugging in the LocalTalk cablesA LocalTalk cable kit consists of one connector box, one LocalTalk cable, andsome term

Setting up the Elite XLChapter 11-22 Chapter 1Centronics (parallel) connectionThe Centronics parallel connection between the Elite XL and a PC req

Setting up the Elite XL 1-234. Switch on the printer and the printer.5. Switch on the PC6. Set the printer for Serial communication.The 8-pin seri

Setting up the Elite XLChapter 11-24 Chapter 110BASE-2 (RG-58, Thin Coax, or Thinnet) network connectionThe Elite XL connects to 10BASE-2 Ethernet

Setting up the Elite XL 1-25Direct Ethernet connectionBecause of the increasing availability of Ethernet in personal computers, thepossibility of

iv ContentsChapter 2 The Elite XL front panelIntroduction to the Elite XL front panel ...2-1Front panel (LCD) display

Setting up the Elite XLChapter 11-26 Chapter 1 Option 2 - BNC to BNC connectionThis connection option specifies a BNC (10BASE-2) connector on the

Setting up the Elite XL 1-27Direct Ethernet connectionElite XL 10BASE-2connector50 ohmTerminator(see step 4)BNC “T” connector(see step 2)RG-58 cab

Setting up the Elite XLChapter 11-28 Chapter 1Configuring the Macintosh EtherTalk softwareIn order for print data to be transmitted to the Elite X

The Elite XL front panel 2-1Introduction to the Elite XL front panelThe Elite XL front panel includes an LCD display window, four LEDs thatshow th

Chapter 2The Elite XL front panel2-2 Chapter 2Paper LEDThe Paper LED is solid when the printer is either out of paper, the wrongsize paper is loa

The Elite XL front panel 2-3the front panel LCD window will display a request for the required size ofpaper to be inserted into a paper tray. The

Chapter 2The Elite XL front panel2-4 Chapter 2• To reset all menus and submenus to the factory settings.Press the On Line key to set the printer

The Elite XL front panel 2-5The Elite XL menu system• Identifying the current printing interface.When the Elite XL is processing (Comm LED flashin

Chapter 2The Elite XL front panel2-6 Chapter 2• AppleTalk Name: displays the AppleTalk name of the printer.• Page Count: displays the total numbe

The Elite XL front panel 2-7The Elite XL menu system5. Paper Handling — Press the Enter key to access the 8 paper handling submenusSubmenu Descrip

vContentsChapter 3 Using the Elite XL with a MacintoshSoftware installation ...3-1I

Chapter 2The Elite XL front panel2-8 Chapter 26. Emulations_— Press the Enter key to access the four Emulations submenus. Three of thesesubmenus,

The Elite XL front panel 2-9The Elite XL menu system6. Emulations (continued)Submenu Description Settings NotesPostScript(6 submenus)PostScript su

Chapter 2The Elite XL front panel2-10 Chapter 26. Emulations/PCL (continued)Submenu Description Settings NotesFontNumberDetermines the default fo

The Elite XL front panel 2-117. Interfaces — Press the Enter key to access the two Interfaces submenus. One of the Interfacessubmenus, RS422 Seria

Chapter 2The Elite XL front panel2-12 Chapter 28. Info Pages — The Info Pages menu enables you to print four different informational pages. Press

Using the Elite XL with a Macintosh 3-1Software InstallationThe Elite XL software for the Macintosh is provided on the Elite XL Softwareand Docume

Chapter 3Using the Elite XL with a Macintosh3-2 Chapter 35. Click Continue.The installation dialog box appears displaying a list of installablesof

Using the Elite XL with a Macintosh 3-3Installing application-specific printer description filesElite XL xx (PostScript Printer Description) (form

Chapter 3Using the Elite XL with a Macintosh3-4 Chapter 3The Elite XL printer driversThe initial installation procedure installs two printer drive

Using the Elite XL with a Macintosh 3-5Selecting the LaserWriter 8 printer driverSelecting the printer description file (LaserWriter 8 only)The La

vi Options ...3-19Selecting Print options (Elite XL driver)...

Chapter 3Using the Elite XL with a Macintosh3-6 Chapter 3• Click Auto Setup to automatically reconfigure the printer driver afteryou have upgraded

Using the Elite XL with a Macintosh 3-7Printing documents using the LaserWriter 8 printer driverPrinting documents using the LaserWriter 8 printer

Chapter 3Using the Elite XL with a Macintosh3-8 Chapter 3Selecting Page Setup options (LaserWriter 8)Page Setup is an option available in most app

Using the Elite XL with a Macintosh 3-9OrientationThe Orientation option controls the orientation of the print on the page. Verticalor “Portrait”

Chapter 3Using the Elite XL with a Macintosh3-10 Chapter 3Selecting Print options (LaserWriter 8)When you select Print… from the File menu, a dial

Using the Elite XL with a Macintosh 3-11Selecting Print options (LaserWriter 8)Selecting:Auto Select causes paper to be drawn from the tray (in th

Chapter 3Using the Elite XL with a Macintosh3-12 Chapter 3OptionsClick the Options button to display the Print Options dialog box. Thisdialog box

Using the Elite XL with a Macintosh 3-13ResolutionThe Resolution pop-up menu allows you to choose the output resolution (indots per inch) for the

Chapter 3Using the Elite XL with a Macintosh3-14 Chapter 3Saving print files (LaserWriter 8)Selecting the File button in the Destination area of t

Using the Elite XL with a Macintosh 3-15ASCIIPostScript files are usually ASCII text files. ASCII files can be opened by wordprocessing applicatio

viiContentsWindows 95Using a GCC printer with Windows 95 ... 4-13Windows 95 printing software overview ...

Chapter 3Using the Elite XL with a Macintosh3-16 Chapter 3Selecting the Elite XL printer driver (PostScript Level 1)Before printing can take place

Using the Elite XL with a Macintosh 3-17Selecting Page Setup options (Elite XL driver)Page Setup is an option available in most applications that

Chapter 3Using the Elite XL with a Macintosh3-18 Chapter 3Reduce or EnlargeThe Reduce or Enlarge option reduces or enlarges the print (and graphic

Using the Elite XL with a Macintosh 3-19OptionsClick the Options button to display additional layout and formatting options.Flip Horizontal flips

Chapter 3Using the Elite XL with a Macintosh3-20 Chapter 3Selecting Print options (Elite XL driver)When you select Print… from the File menu, a di

Using the Elite XL with a Macintosh 3-21Selecting Print options (Elite XL driver)DestinationThe Destination option allows you to send your documen

Chapter 3Using the Elite XL with a Macintosh3-22 Chapter 3Custom… determines the order in which paper is drawn from theavailable sources. For exam

Using the Elite XL with a Macintosh 3-233. • Choose Remaining (the default) from the pop-up menu below First toprint all subsequent pages from the

Chapter 3Using the Elite XL with a Macintosh3-24 Chapter 3The following example illustrates a sequence in which odd pages are drawnfrom the multip

Using the Elite XL with a Macintosh 3-25Naming the Elite XLIf there is more than one Elite XL on the network, assign each printer a unique name.If

viii ContentsChapter 5 QuickDraw GXIntroduction ...5-1QuickDraw GX compatibil

Using the Elite XL with Windows and DOS 4-1IntroductionThe Elite XL software for IBM PCs and compatibles is included on the EliteXL Software and D

Chapter 4Using the Elite XL with Windows and DOS4-2 Chapter 4The Control Panel window appears.5. Double-click the Printers icon.The “Printers” di

Using the Elite XL with Windows and DOS 4-38. Insert the Elite XL Software and Documentation CD-ROM and click OK.The “Add Unlisted or Updated Prin

Chapter 4Using the Elite XL with Windows and DOS4-4 Chapter 411. Choose Use Print Manager to enable print spooling.This option allows your docume

Using the Elite XL with Windows and DOS 4-5• Tray 2 or Tray 3 causes paper to be drawn from the selected trayif the appropriate optional lower she

Chapter 4Using the Elite XL with Windows and DOS4-6 Chapter 4Options…Click Options… to access the Options dialog box.• The Print to: option allow

Using the Elite XL with Windows and DOS 4-7Advanced Options…Click Advanced Options… to access the Advanced Options dialog box.• The Resolution men

Chapter 4Using the Elite XL with Windows and DOS4-8 Chapter 4Port assignment – Windows 3.1The LPT1 default assignment used by Elite XL driver may

Using the Elite XL with Windows and DOS 4-94. If you use a serial connection (as shown in step 3), click the Settings…button. (The Settings… butto

Chapter 4Using the Elite XL with Windows and DOS4-10 Chapter 4Installing the Windows 3.1 printer description filesPrinter description files (file

ixChapter 6 FontsIntroduction ...6-1Resident PostScript fonts...

Using the Elite XL with Windows and DOS 4-11Printing from Windows 3.1 applicationsThe Elite XL is designed to work with all Windows 3.1 (or higher

Chapter 4Using the Elite XL with Windows and DOS4-12 Chapter 4Selecting Print optionsThe Print option is usually located under the File menu. The

Using the Elite XL with Windows and DOS 4-13Using a GCC printer with Windows 95Using a GCC printer with Windows 95Microsoft’s Windows 95 software

Chapter 4Using the Elite XL with Windows and DOS4-14 Chapter 4Installing Windows 95 printing softwareSoftware installation is accomplished using

Using the Elite XL with Windows and DOS 4-15Installing Windows 95 printing software 3. Double-click the Add Printer icon.The Add Printer Wizard di

Chapter 4Using the Elite XL with Windows and DOS4-16 Chapter 45. Click Next. (For network connection only.)The network path dialog appears.• Typ

Using the Elite XL with Windows and DOS 4-177. Click Next.The manufacturer/model selection dialog box appears.This dialog box contains lists of pr

Chapter 4Using the Elite XL with Windows and DOS4-18 Chapter 410. Click OK.A dialog box containing a list of GCC printers appears.11. Select your

Using the Elite XL with Windows and DOS 4-1913. Click Configure Port…. (For local printer only.)A configuration window, specific to the type of po

Chapter 4Using the Elite XL with Windows and DOS4-20 Chapter 414. Click OK. (For local printers only.)The port selection dialog reappears.15. Cli